Follow these easy steps to get your Zanussi Z 22/5 W,Z 22/5 SI Refrigerator up and running in no time.
Remove all securing tapes. Wash the inside of the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly.
The temperature inside the refrigerator is regulated by a thermostat with 6 temperature positions and one 'OFF' (O) position. Position 1 is for minimum coldness, while Position 6 is for maximum coldness. Turn the thermostat dial to the required position. The intermediate position (3-4) is usually the most suitable. Adjust as needed based on factors like room temperature, door opening frequency, and food quantity.
When first starting up or after a period of non-use, let the appliance run for at least two hours on the coldest setting before adding food. Then, turn the thermostat knob to the normal operation position.
Place the appliance in a cool, well-ventilated room, away from heat sources such as a boiler or radiator. Ensure air openings are not obstructed. The back of the appliance should be close to a wall while leaving the required distance for ventilation.
Check that the voltage and frequency of the power supply correspond to the specifications on the rating plate. Connect the appliance to a properly earthed electrical outlet.
Leave the appliance for 2 hours after installation before turning it on. This allows the refrigerant to settle.